100 Ft. Drain Cleaner
For Gas Pressure Washers Rated 3.0 to 4.0 GPM
This 100 Ft. Clog Hog Drain Cleaner has a larger diameter line to handle the higher flows of commercial machines.
- Includes a stainless steel nozzle that's machined for faster cleaning and maximum penetration when used with your pressure washer.
- Complete with an M22 male coupling that fits most gas-powered pressure washer trigger guns.
- Includes a waterproof double-headed hose tie to keep your drain cleaner neatly coiled after use.
- Length: 100 Ft.
- Coupling: m22 Male
- High Pressure Line OD: 0.48 In.
- Rated Flow: Up to 4.0 GPM
- Working Pressure: Up to 4,000 PSI
- Fully assembled and ready to use
- Model C-100-M
$149 Each
In Stock. Usually ships thesame business day.
Recommended Accessories
Storage Reel
For Your Drain Cleaner
Use this sturdy plastic reel to roll up and store your drain cleaner after use.
- Extra tall 6-1/2" reel height with a 10" outside diameter.
- Hand grip axle makes it easier to roll up your jetter after the job.
- Reel core has a hole with a tapered slot to secure your jetter for winding.
- Folding handle unlocks and flips out of the way for easier storage.
- Made in the USA from HDPE plastic that's rustproof and easy to clean.
- With careful winding, each reel can store your commercial drain cleaner.
- Note: you can buy additional reels to store extension hoses, power cords and more. Each reel stores one jetter or up to 100' of 12 gauge power cord.
- Item BR-E
$12 Each
In Stock. Usually ships thesame business day.
Gadget Pack
For Commercial Gas Pressure Washers
The Gadget Pack contains our most popular spares and accessories. It includes:
- An identical spare nozzle.
- A miniature nozzle cleaning tool with a spiraled cleaning surface to quickly remove sediment from nozzle orifices.
- Two waterproof double-headed hose ties to keep your drain cleaner neatly coiled after use.
- A premium thread sealant capsule to install the spare nozzle.
- Compatible with: C-100-M, C-50-M
- Item GP-C
only with Clog Hog drain cleaners and
cannot be used with other types of
high pressure hose.
$45 Each
In Stock. Usually ships thesame business day.
M-22 Deep Male Adapter
For NorthStar™ Pressure Washers
Use this adapter to attach the Clog Hog drain cleaner to NorthStar trigger guns.
- Includes one M22 deep male fitting for your Clog Hog drain cleaner.
- Only required for NorthStar gas-powered pressure washers because of their trigger guns' extra-long seal cones.
- Includes a premium thread sealant capsule to install the adapter.
- Use 2 adjustable wrenches to install
- Compatible with: all Clog Hog drain cleaners
- Item AS-D
$6 Each
In Stock. Usually ships thesame business day.
50 Ft. Extension Hose
For Commercial Pressure Washers
This Extension Hose connects between your pressure washer and trigger gun.
- Can be used to extend or replace your existing pressure washer hose.
- Includes 22mm twist-end connections and one 22mm adapter bushing.
- Not for use inside of drains.
- Length: 50 Ft.
- Inside Diameter (ID): 3/8 in.
- Coupling: 22mm with adapter bushing
- Working Pressure: Up to 4,000 PSI
- Rated Flow: Up to 4.0 GPM
- Model 602
above ground. It should not be connected
directly to your jetter hose, and is not for
use inside of drains.
$99 Each
In Stock. Usually ships thesame business day.
Workware
Logo Cap
100% Brushed Cotton
This structured cap has a full-color Clog Hog logo stitched in front.
- Six-panel structured cap is made from 100% brushed cotton twill with a buckram front panel.
- Cap has a self-fabric closure with a metal D-ring slider and tuck-in strap in back.
- A full-color Clog Hog logo is stitched into the front panel.
- Imported cap with logo stitching crafted in the USA.
- Bill length: 2.5 In.
- Crown height: 3.25 In.
- Band size: 22.75 In.
- Item CAP-2B
$14 Each
In Stock. Usually ships thesame business day.




